3D Euro Panel Fence Manufacturer Selection Guide: Opening Size, Wire Diameter and PVC Coated Panel Applications

What Is a 3D Euro Panel Fence?

A 3D fence panel — often called a "bending guardrail net" or 3D euro fence panel — is a welded wire mesh panel formed with a characteristic wave or ribbed profile that adds rigidity across the panel surface. The base wire is low-carbon steel, finished with either galvanizing, PVC powder coating, or both. The result is a coated wire fence panel that resists corrosion, retains a clean appearance over time, and can be assembled quickly using standard post and clip hardware.

HEBEI XINTELI CO.,LTD. manufactures this product in its 3D Fence Panel With PVC Coated range. The published specification covers wire diameters from 3 mm to 6 mm, three standard mesh openings, and four common panel heights, with custom sizes available on request.

Key Selection Criteria

1. Mesh Opening Size

The mesh opening — the clear internal dimension of each rectangular cell — is the first specification to confirm because it governs both the visual effect and the physical exclusion capability of the fence.

HEBEI XINTELI CO.,LTD. lists three standard openings for the 3D Fence Panel With PVC Coated:

A narrower cell (50 × 100 mm) provides a denser mesh that limits small-object or small-animal passage and creates a more solid visual screen. A wider cell (50 × 200 mm) reduces material weight per panel, lowers shipping cost per linear metre, and maintains an open sight-line — preferred for highway medians and large sports enclosures where visibility matters.

Buyer note: Custom openings are stated as available. Confirm minimum order quantity and lead time directly with the supplier for non-standard sizes.

2. Wire Diameter

Wire diameter determines the load-bearing stiffness, impact resistance and overall weight of each panel. HEBEI XINTELI CO.,LTD. supplies wire in the 3–6 mm range for this product.

• 3–4 mm wire — lighter, easier to handle on site; suited to low-traffic residential boundaries, garden fences and decorative green-space dividers where physical impact risk is low.
• 5–6 mm wire — heavier gauge provides greater rigidity and resistance to bending force; suitable for highway fencing, sport facility perimeters and commercial or municipal projects where the fence must withstand incidental contact or wind load.

Wire diameter also affects the visible weight of the finished panel. Thicker wire creates a bolder grid that reads well from a distance and can enhance the architectural character of a community entrance or a landscaped median.

3. Panel Height

Four standard heights are listed for the 3D Fence Panel With PVC Coated:

• 1.03 m — low decorative barrier; garden bed edging, park path separation
• 1.23 m — waist-height residential boundary; suitable where full containment is not required
• 1.50 m — standard property boundary height across many municipal specifications
• 1.70 m — near full-height barrier; community perimeter, sports enclosure side panels

Height selection is usually governed by local planning requirements or the buyer's own security standard. If none of the standard heights match your project specification, the supplier states that customisation is available.

4. PVC Coating Color

The standard colour options listed are black, white, and green, with other colours available to order. Green is the most common choice for parks, highway medians and residential gardens because it blends with planted surroundings. Black provides a contemporary aesthetic for community entrance features and architectural applications. White is used where a clean, formal appearance is required.

For the coated wire fence panels to retain their appearance, verify with the supplier that the PVC layer is applied over a galvanized core wire, which provides a two-stage corrosion barrier — galvanizing protects the steel substrate, and PVC shields the galvanized surface from UV and moisture.

Application Guide

The 3D Fence Panel With PVC Coated is for the following applications:

• Garden fence and residential boundary — decorative framing of private plots and green-space edges
• Community and municipal green space — separation of pedestrian zones, lawns and flower beds
• Highway and road median — continuous linear runs requiring fast installation and good sight-line
• Sports facility perimeter — ball-stop and boundary enclosure for courts and pitches
• Parks and port green space — low-maintenance perimeter marking in high-moisture or coastal environments

For highway and port applications, consider specifying the heavier wire gauge (5–6 mm) and a galvanized-plus-PVC finish to maximise service life in exposed conditions.

What to Confirm With a 3D Euro Panel Fence Manufacturer

When evaluating a wholesale 3D fence panel order, ask your supplier to confirm the following before finalising specifications:

1. Wire diameter tolerance — confirm the nominal diameter and the allowable manufacturing tolerance.
2. PVC coating thickness — a minimum coating thickness specification protects against premature chalking or cracking.
3. Core wire treatment — verify whether the core is plain low-carbon steel or pre-galvanized before PVC application.
4. Panel flatness after bending — the 3D ribbed profile should be consistent; ask for a sample panel or dimensional drawing.
5. Post and hardware compatibility — confirm that the supplier's recommended clips and posts match the panel gauge and height you have chosen.
6. Custom size minimum order — non-standard openings or heights will likely carry a minimum order requirement.
7. Packing method — HEBEI XINTELI CO.,LTD. ships on pallets and in boxes from Tianjin, which simplifies container loading; confirm packing weight per unit for freight planning.

About HEBEI XINTELI CO.,LTD.

HEBEI XINTELI CO.,LTD. is a Hebei-based trading and export company specialising in wire mesh and metal fencing products. The company's range includes welded wire mesh, field fence, holland fence and garden fencing, all manufactured from low-carbon steel wire with galvanized, PVC-coated, or combined surface treatments. Goods are inspected before dispatch and shipped FOB Tianjin. Small trial orders are accepted after confirmation, and samples are available on request.

For procurement teams sourcing pvc coated mesh panels or coated wire fence panels at wholesale volume, HEBEI XINTELI CO.,LTD. provides a direct supply path from Hebei Province — the primary fencing manufacturing region in China — to US, Middle Eastern, European and South-East Asian markets.